STARTSMART 12V SUP Electric Air Pump, 20PSI High Pressure Dual Stage Inflation Paddle Board Pump for Inflatable Stand Up Paddle Boards, Boats, Kayak, 12 Volt DC Car Connector

Share With Love!


Price: $129.95
(as of Jul 25,2021 13:50:56 UTC – Details)



Easy to use touch button on carry handle; Backlit LED screen for pre-set and real-time air pressure display; PSI and Bar dual units display; 9ft Power cord and 3.5ft nylon air hose, Universal HR air valve adaptor and 3 different size O-Rings to fit most inflatable SUP. Noise reduction inflators for quiet operation. Intelligent 12V DC electric pump comes with digital control, LCD pressure display. The pump can auto stop at pre-set pressure, or 20 minutes continuously working time reached. Suitable for inflatable boats and SUPs equipped with HR (Halkey-Roberts), Bravo, Naru or similar type air valves, that they have a turning pin or pressing down pin at the middle to control the valve’s Open & Closed position. Pick a best size silicon O-Rings to keep the connection best air tight. If more than 1 SUP use at the same time, Please fast cool down the pump by running in the air for 1 minute between each use. Pump is designed to use it in tropical area such as Florida. Specification – Pump Support Rate: 0.5-20 PSI (0.034-1.378 Bar) – Digital Sensor Accuracy: 0.01 PSI – Controller Method: Pre-programmed digital controller board – Max Pumping Speed: 350L/min at 1st Stage, 70L/min at 2nd stage – Pump Stage 1: Sealed & Quiet turbo fan for high volume inflation – Pump Stage 2: Engineered cylinder type compressor for high pressure – Dual Inflators Switch Point: 0.65 PSI – O Ring Thickness: 0.3mm / 0.5mm / 0.6mm – Sand Filter: Built-in filters for air intake – Pump Working Voltage: 11-14V DC – Max Energy Consumption: 10A, 120W (12V) – DC Power Cord Length: 9ft (2.75m) – Air Hose: 3.5ft Length & with HR Valve Adaptors – Product Net Weight: 3.6 Lbs
Stand Up Paddle Board Pump programmed intelligent digital controller for dual stage inflation and LCD display. New firmware and hardware improvement help SUP20D working better and a wide range product support. Built in a smart monitoring feature, when the pump starts to inflate, the computer monitors the real time pressure reading and find a best timing to switch the stage. Pump temperature sensor and time counter included, Auto Stop protection feature built-in
1st stage max speed 350L/min; 2nd stage max speed 70L/min, Pressure setting increments 0.5 PSI and support up to 20PSI. Real time pressure monitoring and auto stop once selected pressure reached; High efficient dual air inflators controlled by digital pressure controller module; Supported working range 0.5 – 20 PSI (20 PSI = 1.378 Bar =138 Kilo-Pascal); accurateness 0.01 PSI.
Built-in sand filter for air intake & pump cooling system; Built-in outtake chamber for noise reduce and better efficiency. One-way diaphragm valve to protect the inflator and maximize the speed. Designed for inflatable boat, SUP and paddle board; About 10 minutes to inflate a 12ft SUP or a 9ft inflatable boat (3.5 PSI) with air mat floor (12 PSI) fast and easy.
Super light weight 4Lbs and Dimension only 10”x7”x7” with easy carry handle; Reinforced 4ft air hose. Perfect handy size for pumping boats, SUPs and Paddleboards. 360 degree free turning main air hose connector provides flexible pumping positions. Screw-in style adaptors provide perfect air tight.
The pump’s 12V DC connector (Car Cigarette Lighter connector) has a built-in 12A fuse. Cigarette lighter spare fuse is provided with the package. Pump user manual is included in the package and downloadable from our website.